Linksys re6700 setup

Setup problems with the Linksys RE6700 extender can be resolved in a variety of ways. Check where the router and extension are positioned. Swap the old wires for new ones. Eliminate any other WiFi devices connected to the Linksys extender network.
Advice: Try the more sophisticated advice below if these suggestions are unable to resolve the problem.

Go to the web control page for the Linksys RE6700 extender first. Next, select the software upgrade option by finding an administrator option and clicking on it. Install the program file on your laptop or PC if you see the most recent version. The Linksys RE6700 extender software upgrading method requires a computer restart after the file is installed. For ten seconds, press the Linksys RE6700 extender’s reset button. The extension remains in place once all of its LEDs have turned off. Now, your extender has been reset entirely. You will need to repeat the Linksys RE6700 setup procedure following the reset. Take a look at the instructions below if you want to repeat the configuration process.

Put the Linksys RE6700 extender in close proximity to the router first. Next, press and hold the WPS buttons on the Linksys RE6700 extender and the router that is currently in use. After doing this, let the extension and router device some time to display the steady WPS LED. It follows that both of them were partnered successfully.

Linksys re6700 setup